High Frequency Adar Level Transmitter Water Treatment

Product Details
Customization: Available
After-sales Service: 1year
Principle: Vacuum Sensor
Still deciding? Get samples of US$ 900/Piece
Request Sample
Manufacturer/Factory, Trading Company

360° Virtual Tour

Diamond Member Since 2019

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
10000000 RMB
Plant Area
501~1000 square meters
  • High Frequency Adar Level Transmitter Water Treatment
  • High Frequency Adar Level Transmitter Water Treatment
  • High Frequency Adar Level Transmitter Water Treatment
  • High Frequency Adar Level Transmitter Water Treatment
  • High Frequency Adar Level Transmitter Water Treatment
  • High Frequency Adar Level Transmitter Water Treatment
Find Similar Products

Basic Info.

Model NO.
Type
Range
0-30m
Measurement Accuracy
±1mm
Accuracy
0.2%
Kind
Radar Type
Structure
All in One
Warranty
1 Year
Certification
CE
Material
SS360L
Transport Package
Standard Packing
Specification
Stainless Steel
Trademark
APURE
Origin
China
HS Code
9028209000
Production Capacity
500 Pieces/Month

Product Description

80g 120g Radar Level Meter Gauge Radar Water Level Sensor Radar Level Transmitter


Product Introduction

High Frequency Adar Level Transmitter Water TreatmentApure radar level meter is operating at 76-81 GHz, which has a maximum measuring range of 120m and a minimum blind zone of 8cm. It supports 4-wire and 2-wire applications. Higher operating frequency and shorter wavelength make it ideal for solid applications, including those with extreme dust and high temperature to + 200ºC. The radar consists of an electronic circuit coupled to a lens antenna and flange for quick and easy positioning.
 
High Frequency Adar Level Transmitter Water Treatment
High Frequency Adar Level Transmitter Water Treatment


The main benefits of using 78 GHz over devices using lower frequency are:
  1.  Based on the self-developed CMOS millimeter wave RF chip, a more compact RF architecture, a higher signal-to-noise ratio, and a smaller blind zone are     realized.
  2.  5GHz working bandwidth means higher measurement resolution and accuracy.
  3.  3°antenna beam angle, so the interference in the environment has less impact on the instrument, and the installation is more convenient.
  4.  Shorter wavelength yields good reflection properties on sloped solids, so aiming towards material angle of repose is usually not necessary.
  5.  Support remote debugging and remote upgrading to reduce the cost of field personnel.
Technical specifications
 
Frequency 76GHz ~ 81GHz,  5GHz FMCW bandwidth
Measuring range x0: 0.3 m ~ 60m
x1: 0.08m~30m
x2: 0.6m ~ 120m
Measurement accuracy ±1mm
Beam angle 3°/6°
Minimum measured dielectric constant >=2
Power 15~28VDC
Communication 2x: MODBUS
3x: HART/Series
Signal output 2x: 4 ~ 20mA or RS-485
3x: 4~20mA
Fault output 3.8mA, 4mA, 20mA, 21mA, hold
Field operation / programming 128 × 64 dot matrix display / 4 buttons
PC software
Bluetooth
 humidity ≤95%RH
Enclosure Aluminum alloy, stainless steel
Antenna type Lens antenna/anti-corrosive antenna / flange isolated by quartz
Process temperature T0:-40~85ºC; T1:-40~200ºC; T2:-40~500ºC; T3:-40~1000ºC
Process pressure -0.1~2MPa
Product Size Ø100*270mm
Cable entry M20*1.5
Recommended cables AWG18 or 0.75mm²
Protection class IP67
Explosion-proof grade ExdiaIICT6
Installation method Thread or flange
Weight 2.480Kg/2.995Kg
Packing box size 370*270*180mm
 


Certificate


High Frequency Adar Level Transmitter Water Treatment


Company Profile


High Frequency Adar Level Transmitter Water Treatment


Packing & Shipping


High Frequency Adar Level Transmitter Water Treatment
High Frequency Adar Level Transmitter Water Treatment


FAQ

Q1: What's your business range?
A: We manufacture PH/ORP/EC/DO/Chlorine/Turbinity meter and provide dosing pump, diaphragm pump,dosing system, pressure instrument, flow meter, level meter, dosing system and so on.
Q2: How about the quality of the managements?
A: We have a complete quality control system , all of our products will be fully pre-inspection by QC departments before shipping to you . We have the certification of ISO,CE we could send the certification test of our company to you.
Q3: Can you offer OEM or design services?
A: Yes, we have our own design department and production tools. We can make OEM products according to your requirements.
Q4: What are your terms of payment and delivery time?
A: We could accept T/T, Paypal, Western Union, Credit Assurance. Generally, we will arrange the shipment within 7 days after received payment.
Q5: How about warranty?
A: 12 months warranty. 




More information please contact us, we will provide the timely feedback!

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier