Plastic alkali acid HCL magnetic drive corrosive liquid pump
Product Introduction The transition parts are made of reinforced polypropylene plastics, pump shafts, bearings and end rings are made of highly corrosion resistant materials.Such as ceramic, filling tetrachloroethylene, carbon, ensure safe transport chemical fluid. Mostly, with no shaft seal design, the bottom of the early solve the traditional mechanical shaft seal pump inevitable run, run, drip, leakage ect.it is to optimize the design of the structure with glass fiber reinforced plastic parts, impeller and injection molding are used within the magnetic rotor, reduce the volume of the system components, greatly improving the pump effect of the
main components of a modular, can quickly remove and check, maintenance is easy.
1. Different chemical solutions mixed together will cause reaction and even heat to damage the pump. Don't pump different chemical solutions with the same pump.
2. Chemicals may cause serious injury. Keep away from dangerous area.
3. Before operating, please check the discharge and suction line and valvesrst. Make sure valves are all in correct position, then start. During operation, check discharge usually.
4. Incorrect operation, for example, valves closed, incompatible material and dry running may cause dangerous. Especially dry running, it will cause heat as well as vapor, even some chemical decomposes hydrogen and explode.
5. Start the pump and check the discharge from the outlet. If it is too low, unplug the pump immediately, and check the pipeline if there is any block..
6. The pump can be equipped with explosive-proof and pressure-proof motor.
Certificate
Company Profile
Packing & Shipping
FAQ
Q1: What's your business range?
A: We manufacture PH/ORP/EC/DO/Chlorine/Turbinity meter and provide dosing pump, diaphragm pump,dosing system, pressure instrument, flow meter, level meter, dosing system and so on. Q2: How about the quality of the managements?
A: We have a complete quality control system , all of our products will be fully pre-inspection by QC departments before shipping to you . We have the certification of ISO,CE we could send the certification test of our company to you. Q3: Can you offer OEM or design services?
A: Yes, we have our own design department and production tools. We can make OEM products according to your requirements. Q4: What are your terms of payment and delivery time?
A: We could accept T/T, Paypal, Western Union, Credit Assurance. Generally, we will arrange the shipment within 7 days after received payment. Q5: How about warranty?
A: 12 months warranty.
More information please contact us, we will provide the timely feedback!
){kind=link}